Technical specifications
Series I120RS
Description HORIZONTAL SHAFT IMPACT CRUSHER
Net Engine Power
Tier 3 - CAT 375hp | Tier 4F / Stage IV - Scania 400hp / Tier 3 - CAT 280kW | Tier 4F / Stage IV - Scania 294kW
Rotor Size
Ø41” x 44” / Ø1033mm x 1100mm
Operating Weight
106,153lbs / 48,150kg
Transport Dimensions
Height 11' 2'' | Width 10' 2'' | Length 59' / Height 3.4m | Width 3.1m | Length 18m
Working Dimensions Height 15' 5'' | Width 19' 1'' | Length 58' 6'' / Height 4.7m | Width 5.8m | Length 17.8m
HOPPER / FEEDER
Capacity: 5m³ (6.5 yd³)
With Extensions: 8m³ (10.4 yd³) 4m (13’ 1”) rear feed width with hydraulic folding hopper extensions
Hydraulic locking
BY-PASS CONVEYOR
Belt Width: 650mm (26”) Max. achievable discharge height target approx. 2.5m (8’2”) Stockpile capacity: 18.1m³ (23.7yd³)
IMPACT CHAMBER
Rotor diameter: Ø1033mm (41”)
Rotor width: 1100mm (44”)
Inlet opening: 1130mm (45”) x 800mm (32”) Direct drive via ‘V’ belts
RE-CIRCULATING CONVEYOR
Belt Width: 500mm (20”)
Screen Angle: Fixed
Conveyor can be hydraulically rotated between re-circulation mode and stockpile mode
MAIN CONVEYOR
Belt Width: 1.1m (44”)
Discharge Height: 3.5m (11’ 5”)
Hydraulic lowering for transport
Full length belt standard
SCREENBOX
Both decks: 3.66m x 1.53m (12’ x 5’)
Drive: hydraulic with heavy duty bearing
Screen can be lowered for mesh changing and general service access
Complete RS System can be quick detached if not required
FINES CONVEYOR
Belt Width: 1.4m (55”)
Discharge height: 3m (9’ 10”)
T-LINK TELEMATICS
T-Link telematics hardware and software along with free seven year data subscription are fitted and installed as standard.