Technical specifications
Series J-1175
Description JAW CRUSHER
Net Engine Power CAT C4.4 130hp / CAT C4.4 97kW
Inlet Opening 42" x 30" / 1070mm x 760mm
Operating Weight 119,711lbs / 54,300kg
Transport Dimensions Height 11' 6'' | Width 9' 6'' | Length 47' 8'' / Height 3.5m | Width 2.9m | Length 14.5m
HOPPER/FEEDER
Hopper capacity: 9m³ (11.7yd³)
Feed height VGF: 3.98m (12’ 11”)
Feed width at rear VGF: 2.67m (8’ 9”) Hydraulically folding sides and rear
BY-PASS CONVEYOR (OPTIONAL)
Belt Width: 650mm (26”)
Working Angle: 22°
Hydraulically folds for transport Standard Discharge Height: 2.1m (7’)
Stockpile capacity: 13.8m3 (18yd3) @ 40°
JAW CRUSHER
Terex JW42 Chamber single toggle jaw crusher
Inlet width: 1070mm (42”)
Inlet gap: 760mm (30”)
Under jaw clearance: 460mm nominal
Full hydraulic closed side setting adjus
POWER SOURCE
IE3 electrical motors and Caterpillar C4.4 97kW (130hp) engine for onsite tracking and movement
MAGNET (OPTIONAL)
Belt Width: 750mm (30”)
Drive: Hydraulic
MAIN CONVEYOR
Belt Width: 1m (40”)
Discharge Height: 3.6m (11’ 10”) with standard conveyor Impact bars and wear resistant liners at feed point
Stockpile capacity: 69.4m3 (90.8yd3) @ 40°
T-LINK TELEMATICS
T-Link telematics hardware and software along with free seven year data subscription are fitted and installed as standard.